The Clone-A-Willy Molding Powder refill provides the exact amount of body-safe alginate needed to capture every detail in a single cast. Whether you need a fresh batch after a practice run or are restocking your kit, this powder mixes quickly to create a firm, flexible mold that accurately reproduces skin texture.

What’s Included

• One 0.6 oz (17 g) bag of Clone-A-Willy molding powder (alginate)

Directions for Use

1. Fill the molding tube with cool water at the indicated level.
2. Pour the entire bag of molding powder into the water.
3. Stir briskly for 45-60 seconds until smooth and lump-free.
4. Immediately pour the mixture into the molding tube and insert according to your kit instructions.
5. Hold still for 2-3 minutes while the mold sets. Remove gently once firm.

Compatibility

This refill of Clone-A-Willy molding powder is designed exclusively for the Clone-A-Willy molding kit. You will need the molding tube, silicone compound, and accessories (sold separately) to complete your cast.

Tips for a Perfect Cast

• Use cool water (60-70°F) to slow down the set time, giving you a longer working window.
• Mix vigorously to eliminate lumps — any clumps may cause weak spots in the mold.
• Trim body hair close to the skin beforehand to prevent discomfort when removing the mold.
• Work in a hair-free, draft-free environment to keep the mold pristine.

STAFF PRODUCT REVIEW

We tested this refill with a new kit and found the Clone-A-Willy molding powder performed consistently — it mixed to a smooth, bubble-free batter within the recommended time. The resulting mold captured fine details and held up well during silicone pouring. Our team recommends using a stopwatch to time the stir precisely; even a few seconds off can affect the set. Overall, this refill is a reliable choice for a second attempt or sharing the fun with a partner.

Q: Can I use this molding powder without the Clone-A-Willy kit?

A: No, you need the complete kit’s molding tube and silicone to create a finished cast. This powder alone only makes the negative mold.

Q: Is the Clone-A-Willy molding powder safe for skin?

A: Yes, the alginate powder is dermatologically tested, non-toxic, and safe for direct skin contact. Follow the instructions and avoid swallowing or eye contact.

Q: How quickly does the powder set?

A: With cool water, you have about 45 seconds of working time, and it sets in roughly 2-3 minutes. Using warmer water will accelerate the reaction.

Q: Can I reuse the mold made from this powder?

A: No, alginate molds are single-use and begin to degrade within hours. Pour your silicone soon after the mold is removed for best results.

Weight	0.5 kg
Dimensions	20.32 × 15.24 × 10.16 cm